I just purchased a freeagent go 500gb and tried plugging it into my powerbook g4. it was detected but i tried to mount it and failed. i then unplugged the external hdd. now i plug it into my mac and it does not detect the drive! here is what is written in the log. Mount of “disk1s1” failed Verify and Repair disk “disk1s1” ** /usr/local/bin/ntfsfix has been disabled because of volume corruption issues. ** If you still want to try fixing your volume, use /usr/local/bin/ntfsfix from the command line.. Error: The underlying task reported failure on exit Disk Utility stopped repairing “disk1s1” because the following error was encountered: The underlying task reported failure on exit 1 non HFS volume checked 1 volume could not be repaired because of an error
i then reformatted the drive on my windows to ntfs (it came pre-formatted in ntfs). i plugged it in but the same thing still happens! can anyone help me!
Sat Jan 17, 2009 19:42
Joined: Sat Oct 06, 2007 09:24 Posts: 530
Could you give me the output written in /var/log/ntfs-3g_util.log ? If there is no such log file you may have to turn on debug logging and repeat your attempted mount to get any resonable output. This can be done with a script located in the Tools folder in the .dmg disk image that you used to install NTFS-3G.
Sat Jan 17, 2009 21:03
oh i checked the log from disk utility again. the got that message the first time i detected the drive and tried to mount it. now i plug the drive into my mac and there is totally no detection of it. it just says disk utility started. the drive runs fine on my windows pc.. as to how i get the log file, i just type in the /var.. into terminal? i have already enabled debugging
Sun Jan 18, 2009 06:15
ok so i found out how to get to the log file. it is through console right? there is currently no log file. i will post what is in the log file soon as i have already enabled debugging
Sun Jan 18, 2009 06:31
my mac doesnt even detect the hard drive.. :( it appears in the system profiler tab under USB. but it does not come up in disk utility or finder.. plugged it into another windows laptop, works fine. plugged it into windows pc, works fine. :cry:
Sun Jan 18, 2009 12:40
Joined: Sat Oct 06, 2007 09:24 Posts: 530
as to how i get the log file, i just type in the /var.. into terminal? i have already enabled debugging
You can type:
cat /var/log/ntfs-3g_util.log
If no such log file appears, even after enabling debug logging, then NTFS-3G apparently never comes in contact with your NTFS drive, and your problem is not NTFS-3G related at all. This seems to be confirmed by the fact that you don't even see your drive in Disk Utility.. so you should complain to Apple or the manufacturer of your USB hard drive.
Sun Jan 18, 2009 14:44
Page 1 of 1
[ 6 posts ]
Who is online
Users browsing this forum: No registered users and 13 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Jul 21, 2011 Re: NTFS-3G Mount problem Error: /dev/disk1s1 got frustrated searching for answers and getting none- i got hold of a copy of paragon NTFS v.9 and installed it. Maybe you guys oughta try this if NTFS-3g continues to have compatibility issues with Snow Leopard. Feb 22, 2016 Hello This solution helped me without problem, since I couldn't finish last step, immediately after that could not mount stopped. I have Lion 10.7.5 Macbook Pro 2011 and have NTFS Mac-fuse solution installed from early beginning. I managed to get this drive to Windows system and unmounted it 'safely'. However, this is one of the very things I use NTFS-3G for: to access and backup a faulty Windows NTFS drive. https://ninyoga.netlify.app/how-to-connect-keyboard-to-garageband-on-mac.html. So, two things for you, as Lead Developer: Why are the instructions you posted to me above not what is in the dialog that appears, instead of what simply does not work?
Hi the forum ! i'm french and sorry for my english... I have buy TUXERA NTFS v2015.1 When i plug my ZALMAN VE350 HDD case on my MACBOOK 13' late 2009 with OSX El Capitan v 10.11.2 TUXERA return me an error message : _____________ Tuxera NTFS could not mount /dev/disk4s1 at /Volumes/iPC services_500Go because the following problem occurred: Aligned I/O enabled. CBCIO enabled. Failed to read last sector (976766974): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ..), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/rdisk4s1': Invalid argument The device '/dev/rdisk4s1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? ________________ but when i connect my HDD case on another PC with Windows 7, there work perfectly. I have try with the TUXERA disk manager, TUXERA found the ZALMAN VE350 interface with partition named : 'iPC services_500Go', i select the partition and i click on 'MOUNT'. After that i have another error message : ________________ Error while mounting disk disk4s1: Cannot allocate memory ________________ Thanks for your answer and your help !!
Capture d’écran 2016-01-23 à 16.55.35.png [ 217.23 KiB | Viewed 18454 times ]
Capture d’écran 2016-01-23 à 16.46.25 - copie.png [ 65.97 KiB | Viewed 18454 times ]
Capture d’écran 2016-01-23 à 16.47.48 - copie.png [ 71.25 KiB | Viewed 18454 times ]
Sat Jan 23, 2016 18:01
Page 1 of 1
[ 1 post ]
Who is online
Users browsing this forum: No registered users and 13 guests
Using iZotope RX allows you to remove noise and also glitches from you audio tracks.RX 7 crack free download have so many powerful features and also tools. Izotope rx 5 crack windows 6. Click me to Download SetupiZotope RX 7 Audio Editor Advanced is one of the best set of tools for editing and repairing audio tracks.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
